Share Email Opening
Title

Mid Shift - Micro-Electronic Technician 

Description

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

  • Provide production assembly support through the performance of soldering, component preparation, mechanical insertion (such as resistors, transistors, capacitors, integrated circuits, sockets, transformers, etc.), wiring, harness builds and touchup of components when required.
  • Adjust or trim materials or hardware to achieve specified electrical or dimensional characteristics
  • Perform assembly tasks such as: crimping, staking, screwing, press fitting, bolting, riveting, soldering, bonding potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, labeling, taping, marking & color-coding parts.
  • Operate equipment and tools relative to accomplishing assembly, stuffing, and prep of electronic components and assemblies.
  • Assemble material and hardware to wire boards or chassis.
  • Install electronic components on boards and prepare boards to be soldered.
  • Examine components already installed to verify accuracy of items such as: polarity, value and positioning according to specifications. Also identify component problems such as damaged components or poor solder connections.
  • Perform mechanical inspections using measuring equipment (calipers, scales, etc.) when required.
  • Connect and solder component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals, and contact points.
  • Replacement of multi leaded through-hole and fine pitched surface mounted components using approved removal tools.
  • Incorporation with Design Engineering and Manufacturing Engineering, perform non-routine assembly operations such as pre-production runs to assist in determining the manufacturability of the products.
  • Assist in the training of and guidance to other assemblers.
  • Ensure that all work is within the guidelines of Extant's process, procedures and customer specifications

EDUCATION and/or EXPERIENCE:

  • High school diploma or equivalent, plus two - four years’ experience in an electronic assembly environment, or equivalent combination of education and experience.
  • Understand and demonstrate ability to solder/touch up SMT, through hole, and harnesses using manual soldering and de-soldering equipment.
  • Must have in depth knowledge of component marking and identification, and a high level understanding of the use of production tools and machinery.
  • Must be able to work flexible work hours (Weekends, split shifts, various shifts)
  • Experience with Wedge Bonder 1470-1478
  • Experience with Manual Wire Bonder, MECH-EL
  • Able to inspect products using microscopes (10X up to 40X) to workmanship standards
  • Experience with wire bonding, wire pull testing (auto/manual & Vacuum), and epoxy die/component attach
  • Experience with wire bonding with both Gold and Aluminum wires
  • Wafer level inspection/handling
  • Die Component Installation
  • Epoxy application manually/automated equipment

PHYSICAL DEMANDS:

Must have excellent manual dexterity and hand/eye coordination, able to lift and/or move up to 25 pounds, able to sit and/or stand for long periods of time, and will at times be required to work with some chemical and bonding agents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

 
Shift -not applicable-  
Citizenship Requirements  
Exempt/Non-Exempt Non-Exempt  
Open Date 11/12/2018  
About the Organization Are you looking for a career that allows big business ability, and small business agility? A company with a family like feel, where you will truly love your job? Look no further! Extant Aerospace is located in sunny Melbourne, Florida, just minutes from the beaches, Kennedy Space Center, and Port Canaveral. Extant manufactures and supplies complex electronic assemblies to the DoD and international customers for military and commercial applications. Extant also provides licensing and obsolescence management services for legacy electronics systems. Extant is growing in the exciting field of commercial aviation and aerospace, and is looking for experienced personnel to help guide us to success! For additional information, please visit our website at www.ExtantAerospace.com  
EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law.

To conform to U.S. export control regulations, requirements of this position include being eligible to work with export controlled products and related data without restriction.  
EmpID None Specified 

supervisorUID None Specified 


This position is currently not accepting applications.

To search for an open position, please go to http://extantcomponentsgroup.appone.com



WE ALSO RECOMMEND

Other Jobs Within Same Category
Mechanical Assembler in Melbourne, FL
Posted on: 3/22/2024
[Apply Now]

Mechanical Assembler in Melbourne, FL
Posted on: 3/6/2024
[Apply Now]

Test Technician - 2nd Shift in Melbourne, FL
Posted on: 2/15/2024
[Apply Now]

Test Technician - 1st Shift in Melbourne, FL
Posted on: 2/13/2024
[Apply Now]

Mechanical Assembler in Melbourne, FL
Posted on: 2/12/2024
[Apply Now]


Other Jobs Within 60 Miles
Summer Intern: Engineering Department - Manufacturing Engineering in Melbourne, FL
Posted on: 2/27/2024
[Apply Now]

Environmental Health & Safety Intern in Melbourne, FL
Posted on: 3/14/2024
[Apply Now]

Test Technician - 2nd Shift in Melbourne, FL
Posted on: 2/15/2024
[Apply Now]

Test Technician - 1st Shift in Melbourne, FL
Posted on: 2/6/2024
[Apply Now]

Mechanical Assembler in Melbourne, FL
Posted on: 2/12/2024
[Apply Now]



 


 
Click here for technical assistance.